Rook MK1 3D Printer Parts
Description
These modifications / addons are for the do-it-yourself [Rook MK1](https://github.com/rolohaun/Rook) printer. ## Electronics Base This base consists of two printed pieces (a main body and a rear cover) and features provisions for the following: - Stacked Raspberry Pi 4 and [BigTreeTech SKR Pico](https://www.amazon.com/dp/B09MVJ5XKH) controller - [Mean Well UHP-200-24](https://west3d.com/products/mean-well-uhp-200-48-200w-48v-4-2a-power-supply-psu-1) Power Supply - [60mm 24v 6010 Fan](https://www.amazon.com/dp/B08R9HM57Q) - Panel Mount Ports for [USB](https://www.amazon.com/dp/B08CXXS9M1) and [Ethernet](https://www.amazon.com/dp/B081P826R6) ## Extruder Mount and Wire Shield This piece not only provides support for mounting a NEMA 17-driven extruder, but also a method of organizing and concealing wires at the top side of the printer. ## Endstop Mount This piece allows for the mounting of a [Z-axis endstop equipped with a plug disconnect](https://www.amazon.com/OCTSEPCY-Mechanical-Horizontal-Switches-Printers/dp/B0B6FJ5YPG). ## Panels These are DXF files for laser cutting Polycarbonate or Acrylic side and base panels. They are specific for a Rook MK1 that was built with 350mm rods. If your rods are shorter or longer you will need to modify these files accordingly. You can use a service such as [Send Cut Send](https://sendcutsend) to get clear Polycarbonate cut.
Statistics
Likes
0
Downloads
1