Crosman 2289 Baffle
Description
First attempt went well. Had a few strings inside that I removed with a red hot straightened coat hanger. Enlarged the smallest hole with a step bit to 8mm just to be safe. Will try the next one as is. I had to wrap the barrel with a layer of painters tape for a snug fit, but will remake for a better fit soon, with front sight and aligning tab for end of barrel. CR-10S was tied up at the moment so I only printed a 247mm version on Ender 3 Pro but it performed very well. Will make a video if the audio will do it justice. Can only imagine the original size will perform even better. Has 5 baffles inside that get smaller from 9mm to 6mm as they get near the business end of the baffle. 11.6mm hole for barrel that needs to be a little smaller, like 11.4mm perhaps
Statistics
Likes
0
Downloads
0