Slim 8BitDo Ultimate Phone Mount with Modular Mounting System (with ports for USB and D/X input switch)
Description
A lot of thought went into this redesign of "8BitDo Ultimate Phone Mount with Modular Mounting System" from printables.com. Thank you jerwil and akmiller01 for the original models and concept. *What's different with this version?* **Out of the way:** Narrower at the top so your trigger/bumper fingers have room to rest on the controller. Slim curve along the back so your knuckles no longer rest on the sharp corners of the print. The clip on bottom of controller is much narrower and further away from d-pad, giving your fingers more room. Essentially your hands should no longer have to fight the mount for real estate. **Less Material:** The slimmer, lighter design is only 2/3rds the weight of the original. Weighing in at exactly 10 grams, but the added thickness to the top hook creates greater surface contact and a tighter fit, so despite using less material it has a firmer hold and less wobble. **Added Convenience:** Two holes have been added - one to access USB-C port for wired controller/charging. One more hole on the back to access the X-Input/D-Input toggle, so you can switch between the two modes and/or use the USB port without removing the clip from your controller.
Statistics
Likes
0
Downloads
1