Tea Organizer (free standing tray)
Description
<b>Freestanding Shelf for displaying Tea.</b> Ideal for an office environment or for placement on a side / coffee / tea table. There are 2 types: 1 Level for 3 positions: For printing you need 1x Base (3 pos) + 1x Rail Optional highlighting of engraving: either print the decoration inlays flat and glue them in place (If you don't own a multi-head printer or MMU) or use the Base (3 pos) MMU which contains the different parts. 2 Levels for 6 positions: For printing you need 1x Base (6 pos) + 2x Rail + Shelf (6 pos) Optional highlighting of engraving: either print the decoration inlays flat and glue them in place (If you don't own a multi-head printer or MMU) or use the Base (6 pos) MMU which contains the different parts. For assembly I would advise to glue all parts to secure them firmly (I did). All parts can be printed without support. I printed with fuzzy mode for the base (6 pos) and shelf. The connection between the shelf and the base therefore became too tight, I had to trim it a bit to get it to fit. Tip: If you want to glue the decoration as inlays, you can scale in Z to make the decoration stick out more. (thicker printing)
Statistics
Likes
0
Downloads
0