Sound reflectors for tablet/pad
Description
On tablets with speakers embedded in the sides, most of the sound produced travels... sideways. These funky ears redirect a significant part of the sound forward, at you. Sound quality? Can't really if it improves or drops, some higher registers sound definitely sharper. Volume increases by a good bit though. The STLs and the project are only for lower-left/upper-right corner. You need to mirror them in your slicer to produce two remaining corners. The attached STLs are fitting my Lenovo Tab P11, but there's a parametric FreeCAD project, so you can measure distances and dimensions on your pad, enter them into the project's spreadsheet, and the parts matching your pad will be generated. You may want to print a [fillet guage](https://www.thingiverse.com/thing:2120626) first.
Statistics
Likes
0
Downloads
0