Silencer mockup for Paintball (M22x1)
Description
This item is a mockup silencer. The silencer does not suppress the sound! The dummy is put over the barrel by means of front thread and screwed tight, so the barrel is only extended by about 10 - 15 mm. In the example picture, you can see an EMF100 paintball marker with a 16 " Hammerhead One-Shot barrel. The front piece of the two-part handguard can, with screwed on silencer mockup, no longer be used. Settings for Cura 5.1.0 Nozzle: 0,6 mm Linewidth: 0,65 mm Walls: 2 Z-Stiching: User defined--> -Front Top/bottom layers: 5 Smoothing: Only Top-Layer Infill: 25 % (Grid) Print Temp: 230 °C. Bed Temp: 80 °C. Flow: 98 % Print Speed: 160 mm/s Fillspeed: 170 mm/s Wallspeed: 80 mm/s Movementspeed: 210 mm/s First-Layer and Details: 35 mm/s Retract: 0.4 mm Retract speed: 60 mm/s Z-Hop: 0,2 mm Brim: 13 Lines Schalli: With polygons through the cylinder Schalli1: Without polygons through the cylinder (For optics only)
Statistics
Likes
0
Downloads
0