Return Line Holder For Aquarium
Description
Pretty simple part I need and figured I share it in case anyone else does this version is to be used with 1inch PVC and is designed to be snug you will still need to use glue and may need some sanding due to slight variations in tolerances Its purpose is for the return line to be glued to one side and a return jet to the other the slot is for a tank with 3/8ths glass but has 2 1/4x20 threaded holes for thinner glass and for more secure fitment USE NYLON BOLTS they are available at Lowes and Home Depot I would use ABS if possible or PETG PLA IS NOT RECOMMENDED AND WILL DEGRADE AFTER TIME I'M NOT RESPONSIBLE IF YOU TORQUE THE NUTS DOWN AND CRACK YOUR GLASS JUST SNUG THEM
Statistics
Likes
0
Downloads
0