FliteTest Gremlin V2 Battery Strap
Description
The gremlin comes with clips to use rubber bands to mount your battery. The small clips/spaces were something I found annoying to fumble with, so I thought a TPU print might do the trick. This print has worked great for me! It hold tight enough that I don't worry about the battery, but is pliable enough to be able to slide the battery in and out without having to remove the strap. I also wanted a way to hold down the charge cable without pinching the smaller wires, which a 3D print design offered the ability to add! - To put the cable in, I slide a key or small tool in-between the strap and battery which causes the soft clip to open up. I find this much easier then pealing it open. The one I'm adding is for the Tottu 650 battery that came with the beginners kit: https://store.flitetest.com/ft-guardian-gremlin-v-2-get-started-bundle/ If I end up with different/larger capacity batteries, I'll make sure to post any revisions here as well. Total printed weight is just shy of 1.4g
Statistics
Likes
0
Downloads
0