VW T3 Vanagon side marker light hole template
Description
This is 2D lasercut acrylic template for Volkswagen T3 Vanagon (Transporter) It measures from the weld seams. For my van the horizontal weld seam was removed so I had to mark the horizontal groove. I made two but I used just the one that has hole center positions and then drilled holes first with 1.5mm bit afterwards sides with 5.5mm and center with step drill bit. Original hole was 34.5mm but it could be left smaller as the light easy fits in to hole even smaller than 30mm. If you are planning to use dremel for cutting the center hole then you can use second template with real size holes to mark where to cut. Here are part numbers to find these marker lights: EU: W17D US: 463 826 00 41 (G Wagon light, larger variety, also dark ones) Plastic nut: N90535301 111953170 V10-2705
Statistics
Likes
0
Downloads
0