VoCore 5" Case With WS2812 LED
Description
Upgrade of my version of the VoCore 5" case. You will need an Arduino of your choice as well as 2 WS2812 (precisely these https://fr.aliexpress.com/item/4000193674297.html?spm=a2g0o.order_list.order_list_main.30.49045e5bcXlC7W&gatewayAdapt=glo2fra). I didn't print it (and it's not planned yet) so it will stay in "Working Progress" until someone gives me their opinion. You will have the choice between 2 versions: -The "Desktop" version if you use the "Go_Pro_mount_V3.stl" bracket. -The "Integration" version with the Go Pro attachment on the upper part to integrate it into your Setup. I used 4 M3 x 20mm screws + 4xM3 bolt for the front plate and 1 M4 x 18mm screw +1 x M4 bolt for the bracket. The hole at the back is 14mm. (I advise you not to tighten the M4 screw more than necessary at the risk of breaking the fixation). Although it is not mandatory, for a better finish I advise you to add this (14mm): https://fr.aliexpress.com/item/1005003740923159.html?spm=a2g0o.order_list.order_list_main.10.1b1f5e5b9i2TNw&gatewayAdapt=glo2eng in 14mm While testing I damaged my VoCore 5" after contacting the official website. They charge me $26 for a new LCD. If someone wants to help me buy one to thank me for my work (even 1$/€) thank you very much. (Check that there are no printing imperfections before inserting your Vocore at the risk of damaging it) https://www.paypal.com/paypalme/jeanlouis47 I keep the design files so feel free if you have any queries (like moving the cable hole or put the LEDs under the screen).
Statistics
Likes
0
Downloads
0