Openlock Ship - Walls Only
Description
Using the B_Boat_Tile_3_Double_Mast_OPENLOCK created a problem for me. I couldn't figure out how to fit it on the boat without making the boat obscenely long, so I made it fit from left to right instead of front to back by creating the file... WALL_ONLY-B_Boat_Tile_13b_Boarding_Railing_OPENLOCK.stl I had also made the "WALL_ONLY-Boat Tile 4 Railing OPENLOCK.stl" just in case it was needed, its the same thing as the boarding railing but just the railing of the boat, or wall only as far as tiles go. I printed out "C_Boat_Tile_22_raised_support_frame_supported_OPENLOCK" and put "B_Boat_Tile_1_Open_Deck_OPENLOCK" on it, but realized that I would have had to print out "C_Boat_tiles_19_side_raised_wall". But instead of doing that I made a stand-alone wall back, which also helps customization of the boat other than just the back, which is what I used it for. The file is... WALLONLY-Outside of Raised Ship-WithWindow.stl Lastly I wanted a ladder on a wall on the side of the boat, so I used the ladder from "28mm Guard / Watch Tower"" to make this... WALL_ONLY-Ladder on Wall.stl
Statistics
Likes
0
Downloads
0