F-One Foil Shim
Description
Modeled these shims to work with the latest F-one foil system to be able to shim the rear foil. The files should result in the following shim angles -1.25 deg -1.00 deg -0.75 deg -0.50 deg +0.50 deg +0.75 deg +1.00 deg +1.25 deg I only got to do one test fit on one fuse/foil. checked against the F-one eagle. https://www.f-one.world/wing-surf/hydrofoils/ These are designed to be printed flat, and should be soft enough to just install. for the thicker ones, you might want to heat them up a little bit right before installing. Can be printed in any rigid filament, I have printed in PETG and PLA, but would likely recommend ABS. they are only loaded under compression so it doesnt really matter! I printed these solid with no infill be increasing the top and bottom layer count to cover the full build. keen on any feedback!
Statistics
Likes
0
Downloads
0