EMF100 Stock with Remote Air
Description
This is a stock that fits the Planet Eclipse EMF-100. It is designed with danger tight tolerances as I did not want and play in the stock, so expect to do some sanding. BEFORE you glue the halves together be sure and do a test fit. It is designed to use an M5 cap screw and acorn nut to make the two arms adjustable. In addition to printing you will need: * Thread Lock - both to seal the threads against air leaking and to lock them. * Paintball Quick Disconnect Male & Female 1/8 NPT - https://www.amazon.com/gp/product/B07D3Y69NL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 * From you local hardware store: - 1/8 NPT Tee - 1/8 NPT End Cap - 1/8 NPT Elbow - 1/8 NPT close fitting (times three) Assemble the hardware as in the photo, test fit first, then thread lock. After printing and assembling the printed parts, put the Stock Arm into the EMF with the stock bolted on. Attach the assembled and thread locked hardware to your remote connection. Slide the Air arm around it and bolt in place. Then glue the hardware to the air arm, with multiple layers filling gaps so it holds well.
Statistics
Likes
0
Downloads
0