Armattan Marmotte Front Wiring Tray for Walksnail Avatar VTX
Description
The Marmotte does not have the correct mounting holes for the Avatar VTX, and the enclosure space is extremely tight both length-wise and height-wise. A 3D-printed stack converter is required, as the Avatar VTX is a 25.5 x 25.5mm stack, and the Marmotte comes with a rear 30 x 30 mm and front 30 x 30 mm or 20 x 20 mm stack. Alas, neither are suitable, as the VTX outer dimensions are too large (33 x 33 mm). I made a 3D-printed stack converter that shifts the VTX backwards. Use a pair of the 20 x 20 mm holes to secure a 3D-printed adapter for the VTX, and then 4 long bolts to mount the VTX atop the tray, securing with nuts. The underside space can be used for the RX. The grooves can be used for routing motor cables.
Statistics
Likes
0
Downloads
0