Radiomaster v4 gimbal dropper/spacer
Description
Nothing special, just a spacer that can be used to recess a Radiomaster v4 gimbal. I know it works with a Boxer because that's what I have. Will probably also work with the TX16s. I realize there are some other models on thingiverse that do the same thing, but none of those offer a 7mm drop! So I made my own. I've uploaded a few different depths but also included the freecad file in case you needed to have your own 6.9mm deep one or something like that. My model also fits less tight in the radio so you don't have to drill anything out or clamp it in, it just drops into place. You'll need longer screws, I don't know exactly what they are. I was lucky enough to have screws left over from some servos I got that worked nicely. I did have to ream out the hole s in the plastic standoffs in the radio just slightly though to make them fit right. You must be very careful with your choice of longer screws. Too thin and they won't bite the plastic. Just a little too wide and you'll split the plastic standoff and strip it out. The old fallback is just drilling all the way through and using a long m2 bolt, but that won't look very good.
Statistics
Likes
0
Downloads
0