Keychain Bit Driver
Description
Just a little keychain that holds a 1/4 inch bit and screws closed. I've seen a few similar designs here and products online, but I decided to make one that was a little slimmer and, in my opinion, sleeker; I really tried to make something that's nice to hold and look at. When it's fully screwed closed, the seam almost disappears, and some sanding could probably make this thing look real nice. I designed this with the Leatherman Squirt PS4 multitool in mind, so the hole for the key ring works best with the little keyring included with the Squirt. Furthermore, the slot is designed to fit the file or flathead on the Squirt, though I'd assume similar tools from other small multitools would also fit. The purpose of the slot is to provide a little more leverage on tighter screws, as shown in the pictures. At the moment the fit is pretty true to the Squirt tools, but it wouldn't be very hard to widen that slot to accommodate a key or something similar instead. As far as the fit of the bit, it's pretty tight. It's meant to hold the bit in permanently. I actually had to tap it in with a hammer to get it all the way in there. Again, if one wanted to modify the design for a looser fit on the bit so it could be interchangeable, that wouldn't be too hard either. Enjoy! Please let me know what you think in the comments!! This is my first time posting on Thingiverse, and any feedback on the parts, the images, or the post would be so greatly appreciated! (This one was probably my main inspiration: https://www.thingiverse.com/thing:2008778)
Statistics
Likes
0
Downloads
0