DNA Go E-Pipe
Description
This is an e-pipe design based on the DNA Go board very similar in size and shape to a Créavap Gandalf but at about 1/5 the cost to make. The specimen on the photos has been hydro-dipped with a wood pattern and then varnished with a stain as well to further emulate a true wooden pipe ;) Some parts other than the 3D printed ones are needed to make one of these: - 1x DNA Go board: You can liberate one for cheap from a Wismec Preva Pod (e.g. https://www.washington-vapes.co.uk/wismec-preva-dna-kit) - 6x 2mm diam x 6mm length Screws for the top cap (e.g.: https://www.aliexpress.com/item/1005004391711369.html?spm=a2g0o.order_list.order_list_main.5.10471802VMZx57) - 2x 2.5mm x 10mm length screws for the 510 connector. (Alternatively 2x 2mm * 6mm) - 1x 24mm MM510 V2 Standard connector (https://www.modmaker.com/mm510-v2-standard-ss22mm2mmscrew) - 1x V1 18650 Battery Tube (SS) (https://www.modmaker.com/v1-18650-battery-tube-ss) - 2x Silver Spherical Actuator Tactile Switch (https://www.modmaker.com/silver-spherical-actuator-tactile-switch)
Statistics
Likes
0
Downloads
0