Stanley No. 702 Portable Vise Jaw
Description
Replacement jaw for Stanley Tools No.702 portable vise. To make opposite side, simply mirror the stl in your slicer. M3 x 6 screws, with a bit of pressure, will self-tap into mounting holes. While I used PETG at 50% infill, any filament/infill combination should work depending on intent. If you desire using longer screws, I recommend increasing the thickness along the Z axis in your slicer or design software. This vise can be found inexpensively at flea markets and is a useful hobbyist tool.
Statistics
Likes
0
Downloads
0