Ham / CB Crossarm Mountings
Description
**Now Tested And Working!**** **Added 25Mm To 25Mm Tube Attachment (6-9-2015) **Added 25Mm To 20Mm Tube Adaptor (6-9-2015) 25 To 25Mm - Printed In Abs - Not Tested On Pla Yet. 25 To 20Mm Printed In Abs, Not Tested On Pla Yet 25Mm Tube To 19Mm Box - Printed In Abs And Pla - Both Ok. 19Mm Box To Uhf Base, Printed In Abs And Pla - Both Ok. Designed To Fit 25Mm "Jpole" (Aka Hockey Stick) Poles. Typically The Kind Of Thing You See Attached To Awnings Or Eves, With A Tv Antenna Attached. See This Image: Https://Www.Telcoantennas.Com.Au/Site/Sites/Default/Files/Imagecache/Product_Full/Antenna-J-Pole-Hockey-Stick-Gutter-Fascia-Bracket-Mount.Png The Desirable Cross-Arm Would Be Aluminium 19Mm Box Tube. You Will Want A Handfull Of Assorted Stainless 3Mm Nuts And Bolts As Well. I Designed This To Use A Standard Uhf Antenna Base With 10Mm Square "Keyway" On The Stub. It'S Not Hard For Me To Design Different Mountings To Your Need - Or You Can Download Inventor Part File As Well. Inventor Files Attached For The Budding Modding Enthusiast. More Info To Come As I Print And Test Them. Currently Testing In Transparent Pla.... Abs Versions To Come Later. Finally - Remember Not All Printers Are Equal, Not All Operators Are Pro'S. Your Results May Vary, But My Models Measure Up To Spec.
Statistics
Likes
63
Downloads
0