Toyota Switch Mount
Description
This is a switch mount I designed to mount the factory AW11 MR2 fuel switch to the panel underneath the steering column. It's an exact copy of the factory mount except this one is placeable anywhere! The factory mount is molded to the back of the panel. SC panels are hard to come by, so do yourself a favour: get a non-SC panel and print this mount out! I'm sure this will fit other 80s and 90s Toyota's with the same type of switch design. It glues in behind whatever panel you're mounting to. The size hole to cutout on the face of the panel are the same dimensions of the face of the switch. There are two .stl files for download. The one with "Vent Cutout" is designed specifically for the fuel switch location in the AW11 as the vent just below the mount gets in the way. There is a small cutout to allow this mount to go further down to where it is from factory. Otherwise it would sit too high. The other .stl file is for all other applications. I've only printed this in resin and haven't tried on an FDM printer yet, so I'm not sure how fitment will be. I will update this as soon as I do. The tolerances are pretty tight.
Statistics
Likes
0
Downloads
0