Sekigahara Insert
Description
Insert for Sekigahara Cardholders and a custom box for each faction to hold cubes, castles, starting pieces, and some additional blocks. This fits the most recent 5th printing, not sure if box or component sizes have changed any. The boxes and cardholders are sized to fill the box leaving just enough room for rules, player aids, and the mounted map. Side storage works fine. For the box and lid, there are inlays you can print and place into the inset areas (see pictures). For the box, I printed separately and just pressed into place, using a block of wood and a hammer to make them as flush as possible. Make sure you use a higher infill if you want to do that! For the lid, I printed with no supports but checked the slicer to see what the last layer with the inset image was. When that layer completed, I paused the printer and placed the previously printed inlay piece(s) into the holes with a little gluestick on them to help, then let the next layer print right over them with the inlays acting as the support. The castle is simply resized from the original, not a real remix. Enjoy!
Statistics
Likes
0
Downloads
0