Switch for blinker 280z
Description
*CONFIRMED TO WORK ON 280z* This is the rocker switch that attaches to the blinker stalk to turn the blinkers on. Up until I've uploaded this this part has been completely unattainable. The only other option is to pay $300 for an entire new assembly. Obviously you need the springs, ball bearing, and copper switch bar from the melted/broken one to make this work as this is just the plastic. the reference I used was melted to the point it didn't work but was still mostly intact. The tolerances are pretty high so a pretty poor printer should be able to print this no problem. Feel free to add a higher tolerance as needed but it works fine without. I would say this has been recreated with around 90% accuracy and functions the same as the original
Statistics
Likes
0
Downloads
0