Hololive EN - Ouro Kronii's Swords - Tick & Tock
Description
Ideally you'll need a 30x30x35cm bed or larger, the handles only just fit on my CR-10 bed. There are files for 20cm beds like Enders, but you'll need to join more pieces together and will have more seams and misalignment, depending on how good your post-processing is. Also while it can be done on a bedslinger, pieces of the blade are pretty tall and will suffer from them swaying. There are files included with an added thick area to the parts that's .8cm thick to give better bed adhesion and prevent parts from coming off mid-print. It will have to be cut off and sanded down. Even with this, you'll need good bed adhesion as well. Glue/hairspray is likely necessary along with lowering your Z offset to press it into the bed a bit. Or you can use the one piece blade parts which will have better bed adhesion but will be harder to paint the inside area. Alternatively you can use the file named "Combined" that has the frame and insert joined together. It will stick to the bed better, but will be more difficult to paint. Download the ZIP for the printer size you have, along with the individual STL. Parts with x2 in the same need 2 copies made. Be sure to post a make and send me a message if you make these, and especially if you cosplay. I'd love to see it.
Statistics
Likes
0
Downloads
0