Digimon Pendulum Spring Replacement
Description
This is a replacement spring for Digimon Pendulum, Pendulum Z, Pendulum 20th, & D-3 Devices. If you've ever worked on one of those devices it's possible that the little spring popped off and got lost in the backrooms, this will work as a drop in replacement. I printed it on a 0.6mm nozzle so anything under that should be fine, i did slice with a newer slicer that supports doing smaller extrusion widths then the nozzle size. so make sure your using a newer slicer. i also did 0.04mm layer height and starting layer. i wanted it to build on itself instead of just doing 1 layer of the spring, i think i got better results this way. I Printed it in PLA or PLA+ and that should be plenty strong and flexible enough, however if your worried PETG might be a better option though no ones tried yet. remember to adjust your spring tension after installation. by moving the little arm. Enjoy your working Pendulums! <3
Statistics
Likes
0
Downloads
0