Tronxy XY2 pro Part Cooling Fan Shroud
Description
Hallo, this is a part cooling fan shroud for a Tronxy XY2 Printer. It fits only, if you have changed the original hotend against an E3D Volcano hotend,because of the different sizes of the hotends. I designed it using FreeCad, the file is included and you can change the design if you want. You need : 1x fan 4020, 2pin, 24V centrifugal fan (Radiallüfter) 1x 12mm M3 screw 1x 30mm M3 screw 1xM3 Nut 1x washer ( inner diameter fitting M3 ,outer diam.12mm) The short screw goes through the fan shroud into the metal plate of the carriage,the longer holds the fan . The print orientation is shown and some support is needed. I printed in PETG but ABS should also work Have Fun !
Statistics
Likes
0
Downloads
0