Project: A0-TAZ - Lulzbot TAZ Style X Ends for A0-10x Printers
Description
This Project Adds Anti-Backlash And Anti-Wobble Similar To That Found On The Lulzbot Taz Printer To The Older Lulzbot A0-10X Designs. It Will Also Likely Fit Some Mendelmax 1.5+-Ish Derivatives. With The Addition Of A Second Acme Nut, A Metal Spring, And The Printed Parts Above, You Should Be Able To Eliminate Any Remaining Wobble From Your Ao-10X Style Printer. Please Note That You Will Need To Ensure You Have Clearance For The Ao-101 Style Lower X End Clamp If You Are Upgrading An Older Machine. Development Thread Is Here: Http://Forum.Lulzbot.Com/Viewtopic.Php?F=16&T=306
Statistics
Likes
18
Downloads
0