Drilling_Jig_mod_for_GSB_12V_15
Description
Since I didn't want to use a long 8mm rod as a guide I decided to create a different handle so the machine can move past it. To use the GSR12V adapter on the Bosch GSB 12V-15 we used the GSR adapter and put in a hole for an M5 screw+nut to clamp it to the machine. In that way you can move the machine back and forth. There are some knobs for an M8 thread on Thingiverse of you want to add it to the handle extension. Also, the edge piece is just plugged in. Since it seems to hold without any problem, I don't see the need to glue or tighten it. (which you can, if you prefer) Credits and many thanks to poulanker...!
Statistics
Likes
0
Downloads
0