Print in Place SD Card Box
Description
A simple print in place box to hold eight micro SD cards and one full size SD card. Includes a satisfying snap closure. Inspired by povsky's linkage box, but redesigned from the ground up to have an optimized lid swing to clear the SD card. If the linkage doesn't move smoothly, adjust the extruder flow rate and try again. There is a bridged gap on the front of the lid, so good cooling is needed. https://youtu.be/QpdXwScYh6o --- Updates * April 2, 2023 - Made the large slot a bit larger * March 30, 2023 - Initial release
Statistics
Likes
672
Downloads
4866