K8400, 60kw Ikea Bulb heated bed
Description
It is well known that Vertex K8400 doesn't have a heated bed and is not even prepared for that. The original thinking was that Buildtak should solve the adhesion and stability, anyway.... the bed cannot be completely cold to have success, so a temporary or, for a 38-degree C heating proves that an Ikeea 60w bulb can do the job. It can work very well with PLA and flawlessly with Pet-G but is not enough for other filaments.... The support for the bulb is printed in PET-G and can be tight with nylon zip ties. A dimmer can be used to lower the temp after the layers have good adhesion. I use this with the provided glass & buildtak bed!!! *Don't forget to use the three-wire cable with the ground!
Statistics
Likes
0
Downloads
1