Wingspan Dice Tower - magnets, easier to glue, board game
Description
**I'd wait to print this until you see photos. I'm still printing my test print.** I printed [alaorath's Dice Tower](https://www.thingiverse.com/thing:4017612) and found it to be very easy to print (after correcting orientation) but found the back piece overly difficult to glue into place. I brought this model, the original base, and [Harmful_Flea's Tower Add](https://www.thingiverse.com/thing:4594476) into Fusion 360 and made some modifications * I removed the eves so I don't need the slitted base modification. * I modified how the Back attaches to the main tower to be easier to glue * I added my own magnet pockets. I used these [10mm x 2mm magnets](https://www.amazon.com/gp/product/B096ZR3DPM) which I measured to actually 10mm to 1mm. The pockets in the Tower and Base are 12mm x 1mm. * Some other minor changes. * For the Tower Addon, I just improved the geometry a little bit. I'D SUGGEST PRINTING THIS PART WITH SUPPORTS. Print in the provided orientations. The Tower Add will likely print better with supports, but nothing else should require supports.
Statistics
Likes
0
Downloads
0