CR-10 V2 Printhead Hotend Mount
Description
This is a 3D printable printhead designed to replace the stock Creality CR-10 V2 printhead. The stock CR-10 V2 printhead is injection molded, and mine was destroyed by a bad nozzle clog, so I decided to create a 3D printable version that can easily be replaced in the future. There are two versions of the printhead assembly: 1) printhead to mount a stock CR-10 V2 hotend 2) printhead to mount and E3D V6 hotend The following non-3D printed parts are required to build the printhead: M3 x 18 socket head cap screw - qty: 2 M3 x 25 socket head cap screw - qty:2 M3 x 6 socket head cap screw - qty: 4 M3 x 12 socket head cap screw - qty: 2 5010 blower fan - qty: 1 (the stock CR-10 V2 part cooling fan works) 4010 fan - qty: 1 (the stock CR-10 hotend cooling fan works) M3 heat-set inserts, 4.6mm diameter 3mm length - qty: 11 These are the M3 heat set inserts I used: https://www.aliexpress.com/item/1005002526998853.html?spm=a2g0o.detail.1000023.3.7e5e278dfOUtjI Print the following, depending on the hotend used: Front Mount (E3D V6 Hotend) OR Front Mount (CR-10 V2 Hotend) - qty: 1 Rear Mount (E3D V6 Hotend) OR Rear Mount (CR-10 V2 Hotend) - qty: 1 Fan Vent - qty: 1
Statistics
Likes
0
Downloads
0