Honda Grom Fork Vice Adapter
Description
Printed this to change the fork springs in my Grom instead of buying a vice adapter. I printed it at 50% infill and if I remember right 6 walls. I used an m5 cap screw with the outer head of the cap sanded down a little to perfectly fit the holes that are in the inner fork leg. From there just clamped in a normal vice and it was golden. If you're taking off your fork bottoms like I did, let me remind you again it needs a lot of heat, shouldn't take much force once you have it hot enough. And left hand threads!
Statistics
Likes
0
Downloads
0