Daves Modular Organizer-Starter Pack
Description
You can get your stuff organized with this flexible, modular, and extendable system. All needed components (e.g., pen holder, bin, tray) simply fit into a base/holder. Plus, you can modify an existing component or design your own. Everything is standardized to a 1.5-inch (38.5 mm) grid. 1. Pick a base. (12 in this pack) 2. Pick and arrange components on the base. (29 in this pack) 3. Organize your stuff. It’s great for organizing your: - Desk - Workbench - Hobby or craft table - Sewing area - Conference or side table - Shared equipment or shared space - Nightstand - Cosmetics - Project parts and supplies To design your own component to fit the grid*: 1. Exterior dimensions should be multiples of 38.5 mm (e.g., 77 mm). 2. Horizontal walls with a thickness of 1.6 mm print nicely with four perimeters using a 0.4-mm nozzle and 0.2-mm layers. To design your own bases for the grid*: 1. Interior dimensions should be multiples of 38.5 mm (e.g., 77 mm), plus about 0.1 mm tolerance for each grid span, depending on your printer (e.g., 77 mm + 0.2 mm = 77.2 mm). 2. Horizontal walls with a thickness of 1.6 mm print nicely with four perimeters using a 0.4-mm nozzle and 0.2-mm layers. 3. Horizontal walls of at least 8 mm height help keep the components snug on the base. *If you create and post your own component, please tag it with “DavesModularOrganizer”, so all available components are easily found searching with that tag. I’ve also created a [Collection of Organizer Components](https://www.thingiverse.com/antonaccid/collections/37846263/things), and I’ll add your thing to this collection if you message me about adding it.
Statistics
Likes
0
Downloads
0