Daryl Dixons knife from The Walking Dead
Description
In the show "The Walking Dead" the character Daryl Dixon has two super cool knifes that he uses a lot. I am not sure when exactly he gets them but i remember them for the first time in season 10. He uses them both right side and upside down and they are very badass. I tried to find a 3d model to print them but I had no luck so I decided to model them myself. There is basically no information about the dimensions of the knifes so I had to improvise. I used chat GPTs ability to analyse pictures and a screenshot where Daryl is holding the knife to find out the overall length. Then using a reference picture I found on the internet i traced the shape and modeled the rest. The blade is not designed with an edge for two reasons: 1) with it only being 3mm thick it can be hard for the printer to print it with a good quality 2) not everyone wants a visible edge or even in some places it might be illegal If you want an edge and have a very good printer you can modify the model to have edges but if you dont hafe a very good printer you can just file down the edge and refine it with sandpaper. The knife should hold together with the pins and holes but I still recommend gluing at least the two handel parts with supperglue. The pins need to be printed twice because the model is only half a pin (so that the curve is nice on both sides) and those to need to be glued.
Statistics
Likes
0
Downloads
0