E3D Krakken Prusa i3 carriage with Fan, LED and Z-Stop bed leveling.
Description
I Bought A E3D Krakken Print Head So I Could Do 4 Color Printing. The Print Head Is Real Nice But It Required A Carriage For My Prusa I3. So I Designed This In Sketchup Pro. I Decided To Include Some Features Like - The Bearing Blocks And The Main Printhead Mount Are Adjustable In Case Your Prusa'S X-Rails Are Slightly Further/Closer Than Mine Are. There Are Loops And A Zip Tie Hole Set On Either Side To Hold The Excess Wires. The Fan/Led/Z-Stop Bed Leveler Is Also Adjustable Up/Down A Little So You Can Get It Fitted Slightly Above The Print Head Tips. The Fan Ducting Only Blows Out In A Downward Direction To Prevent It From Blowing Onto The Print Tips. I Tried To Balance The Weight As Best I Could So It Would Not Be Too Heavy Toward The Front, I Also Tried To Make It As Narrow As I Could To Give Myself As Much X Distance Possible. Once I Get The Printer Completed And Test Printing I Will Know If Anything Needs Tweaking But I Think It Is Good To Go As Is. Coog
Statistics
Likes
9
Downloads
0