WTB Silverado Bike Saddle mount(s) for Giant Recon TL200 Light
Description
This model allows a Giant Recon TL200 Tail light (and should work also for a TL100) to fit onto a WTB Silverado Saddle (Medium size). I have 2 variants, one with small hoops to mount a small saddle bag and one without. Update 4th April 2003 - test print file has been fixed. There is also a test print to check the saddle rail fitment prior to committing a lot of plastic and time to print the main model. It may be possible that the rail geometry is similar on other WTB saddle types (Let me know now so I can update it here.) You will also need : 10mm x 3mm Cap head bolts (qty = 4) 3mm hex nut or 3mm nyloc nut (qty = 4) - use thread locker if not nyloc. I would recommend the use of PETG for this print for strength and temperature tolerance. Attached screenshot shows how I aligned it for slicing mainly to get flexible strength into the release clip and to make it semi manageable to remove the necessary supports after printing. I have used the alpha 6 version of the Prusa slicer 2.6 (hopefully fully released soon) as I have found the organic supports feature to be far superior in the ability to remove them cleanly from a print, especially with PETG. After printing and with the supports removed, I recommend that you use a 3mm drill to clean out the bolt holes and use one of the bolts to wind in the hex nuts into the Part b print prior to assembly. I have just published a variant of this model that has a Garmin mount suitable for use with a Varia https://www.printables.com/model/442049-wtb-silverado-bike-saddle-mount-for-garmin-varia .
Statistics
Likes
0
Downloads
0