spotting scope wifi camera using esp32 cam
Description
This is 3d print to house the esp32 cam so that it can be used as a wifi camera. It is better than my spotshot which used for quite sometime now. Make sure you use 33 degree camera. The esp32 cam usually ships with 66 degree camera which wont work for spotting scope. Any ov2640 above 66 degree cannot be used on the spotting scope. I have tried them and they don't work for capturing the image from the eye piece. I have attached the fusion 360 files so that it can be modified for the eyepiece of your spotting scope. two m3*12mm screws to assemble the case with eyepiece and cover. I used m2.5*5mm screw and nut to fix the micro usb board to the cover for power.
Statistics
Likes
0
Downloads
0