Snap together case for Orange Pi 5
Description
I wanted a simple case for my Orange Pi 5 board that allowed access to all ports, so I designed this case to just snap together. A 3cm 5V fan should be able to fit in with just pressure, but I provided M3 holes if you want to screw the fan in. The accessory pins are not directly accessible while the case is on. Print with PETG. PLA may be too brittle for the posts. I printed everything with a 0.6mm nozzle, and the case with a 0.4mm layer height. I've provided a prototype riser/clip for an M.2 NVMe drive. I recommend printing this part with finer printer settings (0.2mm layer max), and slow the printer down if you run into quality problems. The clip is designed to spin to lock the drive in place.
Statistics
Likes
1
Downloads
0