Modular Paint rack for 3 Army Painter Squeeze Bottles
Description
First thing i made so go easy. A small modular rack for storing three bottles of Army Painter Paints designed for low drawers with a max height of 52mm. Both in a standard version that is close to be done and a very crude stackable version that is not even close to finished or even tested. Print at your own risk! It can be magnetised on both the sides and the front and back. The magnet specs i planned for are: - Front and Back: 3mm diameter, 1mm thickness - Sides: 5mm diameter, 1mm thickness The magnets i have are the army painter ones but i'm sure there are cheaper options that fit ;) The rack is designed to be able to store the paints upright as well as with the cap down. I added small cutouts in the rear magnet strut so the tips don't interfere. Still working on several versions that hold other amounts of bottles (1, 5, more...) and tweaking this design as i go, so it is still a WiP. It should be printable on both FDM as well as STL printers. Currently trying to print it on my STL ptinter (as it's the only one i have) but i'll update this whenever it's printed. Feel free to remix, non-commercial use only.
Statistics
Likes
0
Downloads
0