Sovol SV01 MGN12 Linear Rail X Axis REINFORCED
Description
### MGN12 Linear Rail X Axis REINFORCED This is an adapter for the SV01 Stock x-carriage to use with a MGN12 linear rail and a MGN12H Block. The part is as narrow as possible, so the belts can still be hooked in completely. The belts therefore still run absolutely parallel. However, the part is also designed to be as torsion-resistant as possible and works excellently in practice, even better than expected. At the top there is still the possibility to use a cable tie to fix the cable harness of the extruder unit. # Needed Parts: - 4x M4 heat inserts (I've used ones for a 5.6mm through-hole). - 4x M4x8-12mm should fit. - 2 Screws directly behind the rail needs to be tighten directly in the printed part. - 4x M3x10mm Screws - MGN12 Linear Rail with MGN12H Block.
Statistics
Likes
0
Downloads
0