Orange Pi Zero2 Case with GoPro Mount
Description
I created this design to fill a need for a __printed case for the Orange Pi Zero 2 that can also mount a webcam with your choice of thread or ball attachment__. This Pi enclosure case also incorporates to a GoPro mount so you could use it with similar accessories. It's perfect to place next to, or attach to a 3D Printer and use with OctoPrint. #### Compatibility: This Orange Pi case design has been tested with only the following devices. The camera I used is a PiHut ZeroCam. If there are other similar camera modules with different dimension, let me know so I can accomodate for it. * [Orange Pi Zero2](http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-2.html) * [Webcam (Generic brand from Amazon)](https://www.amazon.com.au/dp/B09PD1X7HV?ref=ppx_yo2ov_dt_b_product_details&th=1) - This webcam has a tripod thread attachment and you can also seperate the camera from the ball joint, to attach to the ball joint on the case. #### Features * Houses Orange Pi Zero2 (No hats) * Snap-fit case in two parts using holes in PCB * Uses compatible GoPro mount. Should also work with [Module Mounting System by HyVye](https://www.thingiverse.com/thing:2194278). * Ventilation front back and sides * Adequate space for [Easycargo Copper Heatsink](https://www.amazon.com.au/dp/B091KMJKY4?psc=1&ref=ppx_yo2ov_dt_b_product_details) 14mm x 12mm x 5mm * High resolution STL mesh If anyone finds any problems (dimensionally or otherwise) post them up so I can get the fix model. #### Instructions * Print the Front and Back case halves * Optional: recommend 5mm Brim * **Assembly** + Remove any SD cards from the Pi to prevent damage when placing in the case + Place the Orange Pi Zero2 in the case back half, being careful to position the Pi ports in the case holes provided + Gently press the Camera housing into the space provided so it just protrudes out-of-the front of the case + Place the front half over the back, gently align PCB holes with the print standoffs. + The camera cable will need to bend to fit inside the case + Gently press the two halves together until they snap-fit together Credits * [Orange Pi Zero2 by zhikang wang](https://grabcad.com/library/orange-pi-zero-2-2) was used in the mockup render. > ### : : EXPERIMENTAL DESIGN : : > This model has been designed for a specific use-case, it has not yet undergone extensive testing. __Constructive feedback is appreciated.__
Statistics
Likes
0
Downloads
0