ODROID H3 Cluster
Description
ODROID H3/H3+ cluster 3D printed Parts: Storage wallmount: 2xHDD 3.5 inch + 2xSSD with USB adapters Storage wallmount top plate: for aesthetics cover mount +https://www.thingiverse.com/thing:5972631 of wall mount bottom any top with cable slot is applicable +https://www.thingiverse.com/thing:29628 SSD-HDD adapter (if applicable) Laser cut parts: mountingboard.dxf : 6mm acrylic with 4x5.3mm wall mount holes and and 36x5.1mm holes for brazz-inserts protectionboard.dxf (optional): 3mm acrylic with cut-outs for fans, M3 holes for mounting Fasteners: 36 x https://www.123-3d.se/123-3D-Ganginsatser-M4-x-6-0mm-x-6-0mm-20st-i6874-t9745.html (should be available elsewhere) 36 x M4x10mm screws 4 x M4x6mm (hole is 5mm diameter) brazz inserts (for cover mount) 4 x M4x8mm screws 24 x M3x5mm flat screw head for SSD 24 x 6-32, 3/8" (dont speak imperial) Holes towards mountingboard in 3D printed parts might need drilling dependant on printer an material, I recommend printing with 1.8mm perimeters. Otherwise are tolerances implemented in the models.
Statistics
Likes
0
Downloads
0