Bipolar Cable Clamps (Solar)
Description
I've made these bipolar cable clamps and use it for cable management in my Solar Power Plant. It fits for 6mm, 7mm, 9mm and 11mm cables. 6 to 9mm are separated and use only one screw. Notice the two Slim Lines at the lower Wall Part - the Lines will be pushed into the wall or wood and prevent the clamp from rotating once the screw has been place (in theory). Pro: You only need one Screw, Con: The Lines might leave a mark in the wall, less than 2mm deep) Also notice the Air Gap in the middle of the 6 to 9mm clamps. If you tighten the screw well enough the 6mm Clamp will have a diameter of 5,75mm so nothing will happen if you accidently pull on the cable. The 11mm Cables are pretty stiff, that's why I've decided to use 2 Screws, so there is no need for the fixing lines.
Statistics
Likes
0
Downloads
0