Solfe V1 wireless tenting case (bluetooth)
Description
Presenting a tenting case for the wireless Sofle v1. Please note that for the model "Top (requires acrylic plate)" which is shown in the uploaded pictures, microcontroller needs to be soldered to the bottom of the PCB. I additionally use acrylic plate on top of the tenting case to stabilize the switches. If you prefer not to use acrylic plate or you have your microcontroller soldered to the top of the PCB, you can use the "Top (version2)" model instead. This project requires 8 M2*8 screws I used 2000mAh 50x34x10mm battery
Statistics
Likes
0
Downloads
0