BetaFPV Pavo25 Dji O3 Air Unit Prints
Description
Why? My buddy was having some serious bad luck with his Pavo25 frame, esc's frying, stuff shorting, motors going bad. He gave it to me to try out my own luck on it. I decided to make it compatible with the new Dji Air Unit O3 to try out for my Real Estate work. Ones marked as original design below: Is NOT for manufacturing or commercial use, purely for personal and recreational. Please contact me at info@protofpv.com for business inquiries. Notes: 1)Antenna mount, taillight mount is removed. Stuff O3 antenna post all the way in so wires can reach AU (REMIXED from OEM STL) 2)Improved battery strap handles with a hole so it can sit flush to the carbon. Remember to Mirror to print the other side (REMIXED from OEM STL) 3)X brace, this is simply a sexy lacy brace to organize your O3 camera wire so it doesn't fall into the props (Original Design) 4)O3 Camera Cage, In the middle beam are two little protrusions, you can use this to clip the camera wire centered so it is stable. Use one bolt on each side to secure the camera (use lower holes, not the top ones). (Original Design) ***Please note using this frame with the dji o3 au there is no access to the SD card or USB-C, you will need to dremel your own hole in the base plastic. ENJOY, leave a like and comment! Please follow me on youtube and instagram! @PattyFlipz_FPV
Statistics
Likes
0
Downloads
1