Stick shaker Boeing
Description
This is my version/design of the Boeing stick shaker. It's a little bigger then OEM, and uses a bigger motor. I included 3 different size clamps (75/78/80mm), depending on what size tube/pipe you have on the yoke shaft I used a 7,2 volt 550 motor, but you're going to need a voltage regulator to slow the motor down, or else it's going to rip itself apart. 1,4 ish volts seems to be the sweetspot for maximum vibration, yours might be different, depending on what motor you use. Things you need to build one is the following: 2x M6x35mm hex bolt 1x M6x25mm hex bolt 5x M3x20mm phillips head screws 1x M3x10mm screw 2x M4x10mm screws 2x M4x20mm screws 3x M5 nuts 3x M6 nuts 1x spring 7mm diameter x20mm tall ish DC motor 7,2 or 12 volt 540 or 550 motor Voltage regulator.
Statistics
Likes
0
Downloads
0