Gimbal clock
Description
A Stand For This Clock Module: Http://Www.Conrad.De/Ce/De/Product/641871/Dcf-77-Funkuhren-Modul (Or Any Module That Fits In A 49Mm X 24Mm Frame) Designed In Sketchup Make. You Will Need Three M3X16 Bolts, Three M3 Nuts, And Four 3.2Mm Washers For Assembly. I Recommend Assembling The Stand First, And Then Inserting The Module. I Had To Allow For Some Tolerance Between The Outer Frame And The Module Holder; If It Is Too Large, Then Just Add A Washer On One Side.
Statistics
Likes
1
Downloads
0