Volume Knob Cover / Potentiometer Knob (Fixed) - Fender Style
Description
by Segasonicfan Designs https://segasonicfan.wixsite.com/retro @SegasonicfanDesigns on youtube: https://www.youtube.com/@SegasonicfanDesigns -- Check out the full Fender repair video! https://www.youtube.com/watch?v=GXR5mt3JLG4 Remixed @escallic's design: https://www.thingiverse.com/thing:2032538/comments Original design didn't work at all for my knobs, so I re-sized things. NOTE: this was printed on an Ender 3 S1 Pro *before* I knew about dimensional accuracy settings. This this is a 100% stock print without horizontal layer adjustments. Perfect for beginners :) There is a long shaft version and short one - the short one is more likely to fit stock Fender knobs. I used a gel marker to make the indicators on the dial 0.4 nozzle, 40% infill Polymaker Black PLA Nozzle 200 C Bed: 50-60 C Speed 10-20 mm/s (I always set first layer to ultra slow 10mm/s) print with supports, but change to: 75 degree overhang angle support z distance = 0.5mm support x/y distance = 1mm support infill = 10% I forgot to rotate "SSFD_-_Fender_Knob_V0.1.stl" - it's upside down. Just print with the large base part down on the bed. recommend magnetic black mat (Ender 3) although as you see in pics I used flat PEI. I apologize if these settings aren't perfect, I made this print >6 months ago and didn't keep good records back then...(I save my profiles now). Post your makes, leave me a little heart - it makes me happy :D Happy printing!
Statistics
Likes
0
Downloads
0