UNIVERSAL FILAMENT SPOOL HOLDER | GEN 2_ 100mm Version
Description
I spun up Fusion 360 and shortened the FilamentHolder, to fit my mostly 54mm Inner Diameter/50mm Thick Spools (1kg Esun Pla). Now the Filament Holder does not stand out as much. Be aware, total Filament Holder Length is 104 mm and the Maximal Distance between the closest Part of the Nut and its Counterpart of the Spool Holder is 42 mm. The Slope on the Nut and the Holder is about 45 Degree. This might be a tight fit for most Spools. Take proper Measurements and if need be draw a sketch, to avoid printing and realising the finished Product is to short for your Usecase. ;)
Statistics
Likes
0
Downloads
0