Transmitter Thumb Grips - M3 & M4
Description
YA grippy... but these are pretty nice. It's a "lowered thumber" design, but you can use jam nuts to raise them if you prefer. I designed these to fit standard M3 and M4 brass threaded inserts (5mm and 6mm holes). Brass inserts press in with a friction fit, no glue necessary. I designed the M4 version to fit a stock TX16s stick, such that it can still be lowered all the way with an M4 jam nut underneath (I like low sticks). I also tested the M3 version on a Jumper T-pro; to get the sticks as low as possible you have to leave off the M3 nut; they have not come loose without a nut in my testing. Of course, these grips may work on other transmitters with M3 or M4 threads. In case it helps, I printed mine with Siraya Blu on my Sonic Mini 4k printer, using Siraya recommended settings (4.5sec exposure etc...). Keep 'em rippin'!
Statistics
Likes
0
Downloads
0